The tightness of chain chains should be suitable, too tight to increase power consumption, bearing easy to wear, too loose chain easy to beat and off chain.
Chain chain is too long or after the use of elongation, difficult to adjust, can see the situation to remove the link section, but must be even. The chain should be crossed from the back of the chain, the latch plate is inserted outside, and the opening of the locking plate should be in the opposite direction of rotation.
After serious wear of chain chains, new sprocket and new chain should be replaced to ensure good meshing. You cannot replace a new chain or a new sprocket alone.
Chain chains of the old chain can not be mixed with some of the new chain to use, otherwise easy in the transmission of impact, pull off the chain.
Related Industry Knowledge
- Low grasping weight of stockless anchor
- Big Grip of Stock Anchor
- The composition characteristic of Stock Anchor
- The arrangement way of anchor Rod in ship anchor
- Cast Way of anchor
- Market demand of marine anchor chain
- Main types of anchors
- Precautions when using anchor chain
- Place of use of shackle
- Hot cutting technique for shackle
- Introduction to the anchor chain
- Type of anchor chain
- The role of the anchor chain
- Simple and easy to use method for preventing co...